Before you begin Module 3, it's a good idea to check your tag paper sloper one last time before you begin drafting. Sometimes we can make small errors in the process of transferring the pattern to tag paper, or when we are cutting the tag paper on the stitchlines.

I did a live demo of this process in the August 30th Zoom Meeting. Here is that portion of the Zoom recording:

Directions:

Bodice:

Check Side Seam (SS)
Check Armhole (AH) and Waistline (W) Curves
Check Shoulder Seam (SH)
Check Neck (N) and Armhole (AH) curve
Check for 90º at Center Front Neck and Waist (CF-N, CF-W)
Check for 90º at Center Back Neck and Waist (CB-N, CB-W)

Skirt:

Check Side Seam (SS)
Check Waist (W) curve from Front to Back (F to B)
Walk Waistline to Bodice
Check for 90º at Center Front Waist and Hem and Side Seam Hem (CF-W, CF-H, SS-H)
Check for 90º at Center Back Waist and Hem and Side Seam Hem(CB-W, CB-H, SS-H)

Sleeve:

Walk Sleeve Cap to Armhole (AH)
You should have 1/4-3/4" of ease - Sleeve cap is longer than armhole.
Place the shoulder notch at the center of the ease.
Check Underarm (UA) seam length

Click NEXT to begin the August 30th Zoom Activity